The board diagram below shows the Velocity 100 card. Note the locations of the Monitor Connector and the BIOS and SGRAM chips on your Velocity 100 card.
The Velocity 100 AGP card
Bus Slot Diagram |
The diagram below shows a typical layout of bus slots inside a computer. Compare the diagram to your computer to identify the appropriate slot for your new card.
VGA Connector Diagram |
A diagram of the Monitor Connector on your Velocity 100 card and a table of the corresponding display signals is shown below.
![]() |
Pin # | Signal |
1 | Red | |
2 | Green | |
3 | Blue | |
4 | (none) | |
5 | Self Test | |
6 | Red Return | |
7 | Green Return | |
8 | Blue Return | |
9 | DDC Power (+5V) | |
10 | Digital Ground | |
11 | Digital Ground | |
12 | DDC-2B Data | |
13 | Horizontal Sync. | |
14 | Vertical Sync. | |
15 | DDC-2B Clock |